Lennox Hearth C160 - Manual

HEARTH PRODUCTS
KITS AND ACCESSORIES
P/N 506033-42
REV. NC, 03/2010
INSTALLATION INSTRUCTIONS FOR INSTALLING NAMEPLATE USED ON MODELS
S160, SA160, SS210, ST210, S260 AND ST310 FREE-STANDING WOOD STOVES AND
C160, C210, C260, E260, AND C310 FIREPLACE INSERTS
NAMEPLATE KIT AND INSTALLATION
COUNTRY COLLECTION™ WOOD STOVES AND INSERTS
Figure 1
Cat. # Description
H8079 Nameplate Kit with Hardware - Silver
H8080 Nameplate Kit with Hardware - Gold
REPLACEMENT KIT CONTENTS (See Figure 2)
The contents below ship separately with Cat. # H8079 and H8080
1 ea. Instruction Sheet
2 ea. #6 x 1” Carriage Bolt (item #1)
2 ea. #6 Nut (item #2)
1 ea. Nameplate - Lennox (Gold or Nickel, item #3)
1 ea. Nameplate - Country (Gold or Nickel, item #3)
INSTALLATION INSTRUCTIONS
Step 1. Align nameplate on the center of the smoke hood.
Step 2. Insert carriage bolts through nameplate and smoke hood.
Step 3. Open the firebox door to allow access to the underside of the
smoke hood and secure the carriage bolts using the #6 nuts.
REMOVAL INSTRUCTIONS
Remove the nameplate in the reverse order of installation.
TOOLS NEEDED
Open End Wrench - 5/16”
1
Printed in U.S.A. © Lennox Hearth Products 2010
P/N 506033-42 REV. NC, 03/2010
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and the discontinuance of colors, styles and products. Consult
your local distributor for fireplace code information.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Lennox Hearth Products
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
GENERAL INFORMATION
All of these parts may scratch and bend, great care should be used in
handling them.
If you encounter any problems, need clarification of these instructions or are
not qualified to properly install this kit, contact your local distributor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND
OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO THESE
INSTRUCTIONS.
ALLOW THE STOVE OR INSERT TO COMPLETELY COOL BEFORE
PROCEEDING.
3
2
Smoke Hood
Figure 2
NAMEPLATE OPTIONS
This instruction sheet explains how to install a nameplate onto a wood-
burning stove or insert. Your new Country Collection™ wood-burning
appliance includes a nickel Country nameplate in the manual packet and a
nickel Lennox™ nameplate installed on the appliance.