Setting display brightness, Clearing the calibration, Figure 3-27 setting display brightness – Lennox Hearth G8 User Manual
Page 81: Figure 3-26 clearing the calibration

Clearing the Calibration
Clearing the calibration resets the system to the factory defaults.
Setting Display Brightness
The MCU display’s brightness may be adjusted to suit your
preferences. Press the right-hand key to make the display
brighter; press the left-hand key to make it dimmer. When you
are satisfied with the setting, press the center key to accept the
setting.
54-0198
80
TracVision G8 Owner’s Manual - Guide to Technical Information
Return to "Antenna
Status Mode"
Set Brightness?
Yes
Next
Return
Min
Bright
Max
*****************
Dim Display
Brighten Display
The MCU display offers
20 levels of brightness, each
of which is indicated by an
asterisk that appears or
disappers when the Dim and
Brighten keys are pressed.
Figure 3-27
Setting Display Brightness
Return to "Selecting
Autocalibration"
Clear COMPASS Cal?
Yes
Next
Return
Cal Cleared
Clearing Cal
Please wait
This screen is displayed for
3 seconds before returning to
"Clear Compass Cal?"
Figure 3-26
Clearing the Calibration