E.7 installation commands – Lennox Hearth G8 User Manual
Page 135

54-0198
142
TracVision G8 Owner’s Manual - Guide to Technical Information
E.7
Installation Commands
Set/Report GPS Position
Function:
reports or sets default GPS position
Command:
GPS
GPS,XX,D,YYY,E
Response:
GPS = XXD YYYE
GPS: XXD YYYE
Where:
XX = latitude (0-90)
D = S (South) or N (North)
YYY = longitude (0-180)
E = E (East) or W (West)
Report Satellite Names
Function:
report names for satellites A and B
Command:
SATINSTALL
Response:
SATINSTALL,
Report Configured Satellite Names
Function:
report names for all configured satellites
Command:
SATLISTA
Response:
SATLISTA,
Report Valid Satellite B Selections
Function:
report names for all valid satellite B selections for a
given satellite A selection
Command:
SATLISTB,
Response:
SATLISTB,
...,
Install Satellite Pair
Function:
installs satellites A and B as the satellite pair
Command:
SATINSTALL,
Response:
if valid pair, echoes the input data
if invalid pair, returns error message
Table E-7
Installation Commands