18 - replacing the lnb/feed tube assembly, 18 replacing the lnb/feed tube assembly – Lennox Hearth G8 User Manual
Page 119

5.18 Replacing the LNB/Feed Tube
Assembly
1. Using a
7
⁄
16
" wrench, carefully disconnect the RF
cables from the LNB. (Figure 5-44 shows a North
American-style LNB;
shows a European-style LNB).
2. Disconnect the elevation gyro cable from the
in-line connector.
Maintenance
54-0198
121
Figure 5-44
North American-style LNB
Figure 5-45
Elevation Gyro Cable
LNB
RF Cable
Connector
Elevation
Gyro
Gyro Cable
Connector