Lucent Technologies MERLIN LEGEND 6 - Manual (Page 270)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-40 Adding an Extension
6
extension appears on the screen. Attempt the backup procedure again when the
busy extension becomes idle.
NOTE:
By default, the system is set to perform a backup automatically once a
week. You can change this to daily backups or to manual backups. For
more information, see “Automatic Backup” in the “Memory Card” section in
Chapter 3 of
System Programming.
Default filenames in manual backups are automatically dated using the MMDD
convention with no slashes.
Task List: Backing Up the System 6
o
If necessary, read “Memory Card” in Chapter 3 of System Programming for
detailed information about this feature, including how to insert the memory
card into the PCMCIA interface slot on the processor module and
descriptions of the backup files.
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions for “Backup” in the
“Memory Card” section of
System Programming, Chapter 3, or the
summary programming instructions below.
o
When you have finished, leave the Translation memory card in the
PCMCIA interface slot.
Programming Instructions 6
Adding an Extension 6
Use this procedure to add an extension to the system.
Console Procedure Insert memory card
→ T’†‡r€ → 7hpxSr†‡‚ r →
7hpxˆƒ →
Select backup file
→
Dial new backup
filename
→ @‡r → `r† → @‘v‡ → @‘v‡ → @‘v‡
PC Procedure Insert memory card
→ Г → → Д →
Type ext. no.
→
→ U
+
I →
Type label
→ И → З → З → З