Lucent Technologies MERLIN LEGEND 6 - Manual (Page 253)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-23 Programming from a PC with SPM
6
To access SPM through a local or remote modem connection, follow the steps
below. For more information about the procedure format, see
“Using the
Programming Procedures” on page 6–3 .
Console/Display Instructions Additional Information
!
Set up the appropriate physical connections between the PC and the control
unit as described in Chapter 2 of
System Programming.
!
Type „x and press I
to display the SPM Welcome screen shown below.
!
Press any key to display a blank screen on which you can enter modem
commands. (You may have to press the key several times.)
!
Make a data connection to the modem of the control unit.
See Chapter 2, “Programming with SPM,” in System Programming. When the
connection is made, the password prompt appears, as shown in Step 5 .
! Type the remote access password to display the SPM Main Menu shown in
Step 2.
The password does not display when you type it.
ÃÃÃÃÃXryp‚€rǂÃTQH YYY = current version of SPM
ÃÃÃÃUurÃH@SGDIÃG@B@I9
ÃÃÃÃT’†‡r€ÃQ ‚t h€€vt
ÃÃÃÉÃHhv‡rhprÃV‡vyv‡’
ÃÃÃÃQyrh†rà r††Ãh’Гxr’
ГГГГГГГ‡‚Гp‚‡vˆr
ÃÃÃÃÃÃÃWr †v‚ÃYYY
@‡r ÃQh††‚ q)