Lucent Technologies MERLIN LEGEND 6 - Manual (Page 255)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-25 Centralized Telephone Programming
6
NOTE:
Some programming can be performed only when the entire system or
some part of it (such as a trunk or an extension) is idle. See the section
“Idle States” on page 6–11 .
Starting Centralized Telephone Programming 6
Reach the Centralized Programming menu from the System Programming menu.
You can then perform centralized telephone programming by selecting features
from the display or by using programming codes.
Follow the procedure below to get to the Centralized Programming menu. For
information about the procedure format, see
“Using the Programming
Procedures” on page 6–3 .
Console/Display Instructions Additional Information PC
!
Go to the second screen of the System Programming menu.
!
Select Centralized Programming.
T’†‡r€ÃQ ‚t h€€vt)ГГГГГ3 Press More.
HhxrÃhÃTryrp‡v‚
T’†‡r€
@‘‡r†v‚†
T’†Srˆ€ir Pƒ‡v‚†
Pƒr h‡‚ Uhiyr†
Gvr†U ˆx† 6ˆ‘@„ˆvƒ
@‘v‡ Ivtu‡T ‰pr
T’†‡r€ÃQ ‚t h€€vt Æ
HhxrÃhÆryrp‡v‚
Ghiryvt
9h‡h
Q v‡
B 8‡ Q t
@‘v‡