A.2.2 the scsi interface, A.2.2, The scsi interface – LSI U160 User Manual
Page 73
3.75 pc
10.25 pc
11.25 pc
38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
Operational Environment
A-7
A.2.2
The SCSI Interface
The SCSI interface conforms to ANSI X 3T10.11/1142. The SCSI
interface operates as 16-bit, synchronous or asynchronous, SE or LVD,
and supports Ultra160 SCSI protocols. Arbitration is supported for 8-bit
(at lower SCSI speeds) and 16-bit. Active SE or LVD SCSI termination
is provided automatically. SCSI termination power is supplied by the
board.
Connector J3 is a 68-pin HD right angle connector that protrudes through
the back panel bracket and is used for external connections. Connector
J4 is a 68-pin HD right angle header used for internal connections.
and
show the signal assignments for J4 and J3
respectively.