LSI U160 - Manual (Page 44)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
2-24 Installing the LSIU160
2.3 Completing the Installation
Before replacing the cover on your computer, review this installation
procedure check list. This can save you effort later.
Step 1. Replace the cabinet cover on your computer.
Step 2. Plug in all power cords.
Step 3. Switch power on to all devices and your computer.
Step 4. Wait for your computer to boot up.
Step 5. To change the configuration of the host adapter, see Chapter 3,
“Configuring the LSIU160.”
Step 6. Load the software and drivers suitable to your application and
system.
Refer to the PCI Storage Device Management System SDMS
4.0 User’s Guide or the guide for the software you plan to use.
Verify Installation Procedures Done
Host adapter connection in PCI bus slot secure
Internal SCSI bus connections secure (pin-1 continuity)
External SCSI bus connections secure
Proper SCSI bus termination established
Unique SCSI IDs set and recorded for each device