LSI U160 - Manual (Page 67)

LSIU160 PCI to Single Channel Ultra160 SCSI Host Adapter A-1
3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
12 pc
12.938 pc
13.851 pc
48.583 pc
52.5 pc
34.5 pc
34.732 pc
Appendix A
Technical
Specifications
This section discusses the physical environment associated with the
LSIU160. It includes a mechanical drawing of this board, which is shown
in
Figure A.1 . It also includes these topics:
•
Section A.1, “Physical Environment,” page A-1
•
Section A.2, “Operational Environment,” page A-4
•
Section A.3, “Subsystem and Subsystem Vendor ID,” page A-10
A.1 Physical Environment
This section discusses the physical, electrical, thermal, and safety
characteristics of the LSIU160. Additionally, this board is compliant with
electromagnetic standards set by the FCC.
A.1.1 Physical Characteristics
The dimensions of the LSIU160 are 6.875 x 4.0 inches. PCI connection
is made through edge connector J1.
Internal SCSI connection is made through the 68-pin HD connector J4.
External SCSI connection is made through the 68-pin HD connector J3.
The J3 connector extends external to the cabinet through a bracket
attached to the board and the face of the connector. The bracket is a
standard ISA type with a cutout to accommodate connector J3.
The J6 connector is for connecting to the computer’s drive activity LED.
It is a 4 pin one row right angle header wired in parallel with the on-board
SCSI Activity LED.
The component height on the top and bottom of the board conforms to
the PCI Specification Revision 2.2.