LSI U160 User Manual
Page 31
3.75 pc
10.25 pc
11.25 pc
38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
Detailed Installation Procedure
2-11
Step 2.
If you have only two internal devices to connect, plug the other
end of the internal SCSI ribbon cable into the SCSI connector
on your internal SCSI device. An example of this connection is
shown in
Note:
For nonterminated internal SCSI devices, a terminated
cable will be required. This connector must be on the end
of the SCSI cable.
Figure 2.5
Internal SCSI Ribbon Cable to Internal SCSI Device
Connection