Logical Solutions Secure Console Servers SCS-R - Manual (Page 87)

tel (203) 647-8700 Page 87 Product Manual - MAN-000001C
Product Support S
ECURE
C
ONSOLE
S
ERVERS
Appendix B FAQ
A few frequently-asked questions
B.1 How do I do this?
This section is a collection of tips and hints for various setup items. The root user
can change the following features using the following command steps:
B.1.1 Change Port Parameters
Serial Port settings are modified via the stty command (see man page stty). The
serial port settings must be modified in the
rc.serial
file in order to be permanently
changed. Note the following:
• Changing port names is persistent over a reboot
• Changing port communication settings (baud rate, parity etc.) is tem-
porary - the file /etc/rc.serial must be edited in order to save the
settings
To change the Port Parameters, you edit the file:
/etc/rc.d/rc.serial
For example, to change the baud rate for Port 5 to 19,200 baud, you enter:
stty -F /dev/ttyB5 19200 {other options}
B.1.2 Change the Name of a Port
You can change the name of a Port if you know the original name. For example,
to change the Port to “payroll”, you enter:
stty --name=payroll -F /lsi/ports/