Logical Solutions Secure Console Servers SCS-R - Manual (Page 39)

tel (203) 647-8700 Page 39 Product Manual - MAN-000001C
Front Panel Network Setup S
ECURE
C
ONSOLE
S
ERVERS
Figure 4.14 SCS Front Panel Display, exiting the LCD Mode
You are given the choice to Save your changes or to Cancel them.
Figure 4.15 SCS Front Panel Display, Save or Cancel Changes
Press 'ENTER' to save your network changed, or press the Up Arrow to discard
them.When you are done with your network settings, and have made changes, the sys-
tem must restart the network daemon. Progress of this process will be displayed on the
front panel display, and you will see a normal display when the network is restored.
Figure 4.16 SCS Front Panel Display - Saving and Restarting
When the system is done restarting the network services, the display will show:
Figure 4.17 Returned to normal SCS Front Panel Display
To permanently save your new Network settings in the system, you must use the
save command (described later) to write the values to the Compact Flash memory.
Note that if your system loses power before you use the command-line ‘save’ com-
mand, your front-panel-entered network parameters changes will be lost.
Exit to Main Menu
Enter = Save
Cancel = UP
Saving and Restarting
Network Services
Save / Reset Complete
Any Key to Continue