Lifescan ONE TOUCH BASIC BLOOD GLUCOSE MONITORING SYSTEM - Manual (Page 65)

Check the clear, protective coating
over the Meter optics to make sure
it is not scratched or damaged. Rub Test Area with a cotton swab or
soft cloth dampened with water to
remove all blood, dirt, or lint from
the Test Area. If necessary, a mild
liquid dishwashing detergent mixed
with water may also be used. Do not
apply full-strength detergent to the
Test Area. Be careful not to scratch
the Test Area.
58
LSI-97-050 OTB Eg 7/25/97 11:09 PM Page 58