beautypg.com

Lifescan ONE TOUCH BASIC BLOOD GLUCOSE MONITORING SYSTEM User Manual

Page 41

background image

Step 3: Accurate results in
45 seconds

The Meter then counts down from
45 to 0 seconds, followed by a series
of beeps when your result is displayed.

mm 6 . 0

(example)

IMPORTANT:
Always check that “MM” and a
decimal point are displayed with
your blood glucose result. If not, you
may have accidentally changed the
display language and unit of mea-
surement to “P 1” English (mg/dL)
or an electronic malfunction may
have occurred. See Setting the
Meter,
page 7, to reset the language
and unit of measurement to “P 3”
English
(mmol/L).

Be sure to wait for
the beeps before
you note your
result. Your result
will continue to
display until you
turn the meter off
or for 2 minutes,
when the meter

automatically turns off. The Meter
displays results which are between
0 and 33.3 mmol/L. Results above
33.3 mmol/L are displayed as

high

Press the On/Off Button to turn the
Meter off.

mm 6. 0

34

LSI-97-050 OTB Eg 7/25/97 11:09 PM Page 34