Lifescan ONE TOUCH BASIC BLOOD GLUCOSE MONITORING SYSTEM - Manual (Page 62)

Daily Meter Check
Look through the small hole in the
Test Strip Holder to make sure there
is no lint, dirt, or blood blocking any
part of the hole.
If there is anything blocking the
hole, or if the Test Area has dirt, lint,
or blood on it, remove the Test Strip
Holder. Clean the Test Strip Holder
and Test Area by following the
instructions in the next section.
Cleaning the Meter
The Meter and Test Strip Holder
should be cleaned once a week.
In addition, they must be cleaned
whenever the Test Area looks dirty
or the message
clean
test
area
appears on the display.
55
LSI-97-050 OTB Eg 7/25/97 11:09 PM Page 55