Lifescan ONE TOUCH BASIC BLOOD GLUCOSE MONITORING SYSTEM - Manual (Page 48)

MESSAGE APPEARS WHEN
The Meter is ready for you to perform a blood, Check
Strip, or Control Solution test.
The Meter is performing internal checks.
The Meter is ready to receive a blood or Control Solution
sample. If performing a Check Strip test, this is your signal
to remove the Check Strip (Side 1) from the Meter.
The Meter is counting down from 45 seconds to 0.
A blood test is completed. This indicates a blood glucose
result.
mm 6 . 0
(example)
45, 44, 43...0
apply
sample
wait
insert
strip
41
LSI-97-050 OTB Eg 7/25/97 11:09 PM Page 41