Lifescan ONE TOUCH BASIC BLOOD GLUCOSE MONITORING SYSTEM - Manual (Page 51)

MESSAGE PROBLEM WHAT TO DO
The language and unit of See Setting the Meter, page 7,
measurement have been to reset the language and
changed to “P 1” English unit of measurement to
(mg/dL) either accidentally “P 3” English (mmol/L).
or through an electronic
malfunction.
The battery is too low. The Replace the battery.
Meter will not operate.
1) There is dirt, blood, or lint Clean the Test Area
on the Test Area. and Test Strip Holder
according to instructions.
2) Your hand or an object Repeat the test. Keep
covered the Test Area while Test Area clear.
the Meter was turned on.
clean
test
area
battry
114
(example)
[No “ mm” before the
result and no
decimal point]
44
LSI-97-050 OTB Eg 7/25/97 11:09 PM Page 44