Kicker SX900.4 - Manual (Page 21)

21
SX .4 Series Amplifiers
Opera
tion
18.) About - This menu item will display information
about the DAP (Digital Audio Processor) hardware, software
and build date.
Use the
UP
and
DOWN
keys to
view the DSP Version, Software Version,
Hardware Version and Build Date. Press
the
ESC
key to return to the MAIN
menu.
Gain MENU - This menu is where you adjust your left and right
channel gain for each amplifier. There are two GAIN menus, one
for AMP 1 and one for AMP 2. This allows each amplifier to have
its own individual gain setting.
Use the
UP
and
DOWN
keys
to scroll through AMP-1 and AMP-2
and press the ENT key to select the
amplifier you want to adjust.
Use the
UP
and
DOWN
keys to
scroll through LEFT channel, RIGHT
channel or BOTH options and then
press the
ENT
key to select.
Now use the
UP
and
DOWN
keys
to increase or decrease the gain of
the selected channel(s) in .5 dB
increments from 0 dB to +12 dB.
(
.0 to 12.0 )
Press the
ESC
key to return to the
selected amp’s LEFT , RIGHT , BOTH
selection menu. You can now adjust
another channel on this amplifier.
Press the
ESC
key again to return
to the GAIN menu AMP-1 / AMP- 2
options to select the other amplifier.
If done adjusting the EQ, press the
ESC
key again to return to the MAIN
menu.
NOTE...
While adjusting the GAIN you will notice the gain indicator
on the
ISIS
VFD display is lit. This indicates you are in the
GAIN menu.
The AMP1 or AMP 2 indicator will light up to indicate which
amplifier you are currently adjusting.
The LEFT and/or RIGHT indicator will light up to indicate which
amplifier channel(s) you are currently adjusting.
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC