Kicker SX900.4 - Manual (Page 16)

16
SX .4 Series Amplifiers
Opera
tion
SYSTEM MENU - This menu item contains many diagnostic tools
and first time setup options. Use the
UP
and
DOWN
arrow
keys to scroll through the options and press
ENT
to select.
Press the
ESC
key to return to the SYSTEM menu.
1.) Volt Now - Displays the current voltage at the
amplifiers +12 volt terminal.
2.) Volt Min - Displays the lowest voltage seen at the
amplifiers +12 volt terminal since being installed.
3.) Volt Max - Displays the highest voltage at the
amplifiers +12 volt terminal since being installed.
4.) Temp Now - Displays the current temperature of
the amplifier.
5.) Temp Max - Displays the highest temperature the
amplifier has reached since being installed.
6.) Run Time - Displays the total time the amplifier
has been powered up since installation in 1/10th of
an hour increments
7.) Sick Bay - Contains several
diagnostic tools. Once in this menu
you use the
UP
and
DOWN
keys to
scroll through CURRENT , HISTORY and
PINK NOISE options. Press the
ENT
key to select.
7a.) CURRENT shows amplifiers current status or fault
code. The 6 possible codes are:
normal - No problem, normal operation.
thermal - Thermal cutoff protection engaged.
short - Short circuit protection engaged.
Hi-Volt - High voltage protection engaged.
FUSE - Faulty or blown power fuse.
SERVICE - Amp requires service by KICKER.
When you are done viewing
the current status press the
ESC
key to return to the SICK
BAY menu.
7b. ) HISTORY logs the last 5 fault codes and how
long ago they happened when
compared to the RUN TIME log.
Use the
UP
and
DOWN
keys to select the HISTORY log
entry you want to view.
Press and hold the
ENT
key
to view the time it happened.
When you are done viewing
the history press the
ESC
key.
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC