Kenwood KDV-MP6333 EN - Manual (Page 62)

62 KDV-MP6333/KDV-MP6433
Help? Troubleshooting
? The Dimmer function does not work.
✔ The Dimmer wire is not connected correctly.
Check the Dimmer wire connection.
✔ The "DIM" feature in the
to "OFF".
Turn the "DIM" feature "ON", referring to the
? Cannot set Dual Zone System of
Setup> (page 37). (KDV-MP6433 only)
✔ CA-C1AX/ CA-C2AX is connected to KCA-
S220A or other units.
Connect the CA-C1AX/ CA-C2AX directly to
this unit.
? "2ZON" is not displayed.
✔ "SWPRE" feature is set to "AV".
Refer to
Playing discs
? Cannot insert disc.
✔ There is already another disc inserted.
Remove the inserted disc and insert the disc
you want to play.
? A disc ejects as soon as it is loaded.
✔ The disc is quite dirty.
Clean the disc, refer to in
the section (page 9).
? Cannot remove disc.
✔ Disc stops while being ejected.
Continue to push the Eject button until the
disc is ejected completely.
✔ The cause is that more than 10 minutes have
elapsed since the vehicle ACC switch was
turned OFF.
The disc can only be removed within 10
minutes of the ACC switch being turned
OFF. If more than 10 minutes have elapsed,
turn the ACC switch ON again and press the
Eject button.
✔ A disc whose validity date is expired is
loaded.
Turn the power OFF, and wait for 15 seconds
before pressing the [
0] (Eject) button.
? The specified disc does not play, but another
one plays instead.
✔ The specified disc is quite dirty.
Clean the disc.
✔ The disc is loaded in a different slot from that
specified.
Eject the disc magazine and check the
number for the specified disc.
✔ The disc is severely scratched.
Try another disc instead.
? Direct Search does not work.
✔ Another function is ON.
Turn Random Play or other functions OFF.