beautypg.com

Remote controller – Kenwood KDV-MP6333 EN User Manual

Page 54

background image

54 KDV-MP6333/KDV-MP6433

Remote Controller

This unit can be operated using the Remote Controller supplied with the unit.

• Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could

result, if the Remote Controller falls down and gets wedged under the pedals while driving.

• Do not place the battery near an open flame or heat source. This may cause the battery to explode.
• Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak

fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.
Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a
physician.

Battery installation

Using a pen tip or similar object, open the battery
compartment in Direction

2 (as shown) while

unfastening the lock in Direction

1 (as shown).

Insert the lithium battery (CR2025) supplied,
making sure the polarities are correct. (See the
illustration inside the battery compartment.)

• If the Remote Controller operates only over shorter

distances or does not operate at all, it is possible that the
lithium battery is depleted. In such instances, replace the
battery with a new one.

Remote Controller mode switch

The functions operated from the remote
controller differ depending on the position of the
mode switch.

DVD mode
Switch to this mode when
playing DVDs or CDs etc.
with the player integrated in
this unit.

AUD mode
Switch to this mode when
controlling a selected source
or a CD changer etc.

TV mode
This is switched when
controlling TV.

• The position of the remote control mode switch is

indicated in the title of each mode, e.g., "(AUD mode)".

• When controlling a player that is not integrated in the

unit, select "AUD" mode.

• When TV mode is set, point the remote controller to

the connected Kenwood monitor (optional accessory)
for operation. However, the functions available may be
restricted depending on the connected TV monitor.

This manual is related to the following products: