Konica Minolta REVIO KD-420Z - Manual (Page 61)

61
Using the Self-Timer
- Use a tripod.
- You can choose either “3 SEC” or “10 SEC” as the self-timer operation
delay.
- This option is also available in the mode menus for Scene Select (p.62),
Movie/Voice (p.66) and Manual (p.74).
Using the Auto mode menu (
Cont’d
)
1. Select the Self-timer menu option.
• The current setting is displayed.
“SELF TIMER OFF” is displayed as the
default setting.
2. Use the
̆ or ̄ buttons to select “3
SEC” or “10 SEC”.
Press the SET/DISP. button to
complete the setting and return the
camera to shooting mode.
3. When you press the shutter button, the
self-timer lamp flashes and the shutter
releases after either 10 seconds or 3
seconds.
1
• If you wish to cancel the self-timer function, close the lens cover.
• The “10 SEC” setting is cancelled after each shot. If you intend to use the self-timer
again, you should reset the delay each time.
The “3 SEC” setting is retained after you take the shot and can be used for subsequent
self-timer shots.
• To revert to normal shooting mode, select “SELF TIMER OFF”. You can also cancel
self-timer mode by turning the power off.