Kathrein MSK 125 - Manual (Page 61)

61
STORING MEASUREMENT RESULTS
TFT display
DELETING MEASUREMENT RESULTS FROM THE DEVICE MEMORY
The Memory Explorer command displays the
stored measuring results on the TFT display.
Indicates the stored settings on the TFT
display and opens the entry fi eld of the storage
place where the measurement results are to
be deleted.
Use the Up and Down buttons to go a page up or
down in the screen content.
...
Enter the point before
the storage number: Enter storage place .00 to .99.
From 00 to 99 any storage place can be deleted,
or if you enter 00 ... 99, the entire memory will be
deleted.
Complete - the storage place is deleted.
TFT display
LC display
STORING MEASUREMENT RESULTS ON THE SD CARD
First get the measurement result stored in the device onto the TFT display as described above under
“Recovering measurement results”. Here storage place “2”:
Storage place “02” is displayed.
Press the button
The LC display reads “from 02 - __”
If you press again without entering
another storage place, the measurement results
of storage “02” will be stored on the SD card
(memory card) under a serial number.
TFT display
LC display