Kathrein MSK 125 - Manual (Page 18)

18
SAT
ANALOGUE SATELLITE RECEPTION
In SAT mode the MSK 125 can be adjusted to “Analogue” and “DVB S(2)” reception types.
SAT ANALOGUE/DVB-S(2) SWITCH
Press once = SAT analogue
Press again = DVB-S(2)
Press again = SAT analogue again
FREQUENCY DISPLAY AND ENTRY
To measure the level of a reception signal, you must fi rst enter
the desired frequency. The LC display indicates the frequency
and the measured level. The frequency can be entered
from 920 MHz to 2150 MHz in 100 kHz intervals.
COMMAND OVERVIEW OF SAT FREQUENCY ENTRY
Switch to satellite reception (analogue or digital)
...
Enter frequency
Frequency can be changed in 100 kHz intervals
Confi rm entry
LC display:
• Frequency: 1288.0 MHz
• Operating mode: SAT
• Level: 66.5 dBµV A (A = analogue)
Example
To enter the frequency 1508 MHz:
Press
LC display:
• Frequency: 1508.0 MHz
• Operating mode: SAT
• Level: 86.5 dBµV (A = analogue)
A “+” or “-” on the display means that the MSK 125 has not been
adjusted precisely to the desired carrier. Use the and
buttons to refi ne the frequency for optimum reception. A
vertical line on the display indicates optimum frequency adjustment.
Complete your frequency entry by pressing the button.
The most recent frequency setting remains even after you switch
the MSK 125 off if it has been entered with digits and confi rmed
by pressing .
Note