Finding individual reception frequencies – Kathrein MSK 125 User Manual

Page 34

SAT

FINDING INDIVIDUAL RECEPTION FREQUENCIES

The

function allows you to adjust the antenna to the

maximum reception signal. The display indicates the reception in

the form of an increasing or decreasing bar. The

buttons allow you to set the measurement range to three sensitivity
levels.
The bearing sound enables you to monitor the level. The pitch of
the bearing sound is proportional to the received signal level.
The volume of the bearing sound can be adjusted using the

volume buttons.

Command overview for fi nding

Switch to “Find” mode.

Switch the measurement range, the bar graph

and the bearing sound:

Level range 1: Large input levels

Level range 2: Medium input levels

Level range 3: Small input levels

Exit this mode

LC display:
• Level range 2: Medium reception level
• SAT mode
• Bar graph display with bearing sound

Example

Launching the “Find level” function:

• Press the

button

• Slowly turn the antenna until the bar display reaches its maximum
• If necessary, decrease or increase the sensitivity using the

and

buttons

• Slowly turn the antenna until you have reached the maximum

level

Exit “Find level”:

Press the

button.