Kathrein MSK 125 - Manual (Page 48)

48
HF STANDARD SWITCH - TERRESTRIAL
Call up the standard switch menu.
... Select standard
After that the Demod menu is exited
automatically.
Press or to exit the Demod menu
without any changes.
DIGITAL TERRESTRIAL TV RECEPTION
In TERR mode the MSK 125 can be set to the “Analogue” and “DVB-T/H” reception types.
ANALOGUE TERRESTRIAL/DVB T/H SWITCH
Press once = Analogue terrestrial TV
Press again = DVB-T/H
Press again = Back to analogue terrestrial TV
TV MEASUREMENT
SETTING DVB-T/H DEMODULATION PARAMETERS
Press the button to go to the bandwidth
selection for DVB-T/H:
• 1 = 6 MHz demodulation bandwidth
• 2 = 7 MHz demodulation bandwidth
• 3 = 8 MHz demodulation bandwidth
Select the required HF bandwidth by using the digit buttons
...
or exit the entry without any changes by
pressing .
The MSK 125 sets all other parameters for DVB-T/H
demodulation automatically.
After selecting the demodulation bandwidth you are automatically
directed to the HF standard switch.
Note
HF STANDARD SWITCH - DVB-T
... Select standard
After that the DEMOD menu is exited
automatically.
If you wish to keep the settings unchanged, press . Please
note that the selected standard remains even after the device
is switched off.
Press the button to exit the menu at any time.
The HF standard switch is for setting the channel bandwidth.
Note