Kathrein MSK 125 - Manual (Page 16)

16
GETTING STARTED
In the next menu press the or button to defi ne the
measurement unit the level is to be indicated. Press to
keep the current setting.
The next menu prompts you to set the mute function using the
or button. If you select ON, the MSK 125 is switched
to silent as long as the incoming signal on the RF input is below
30 dBµV. Press the button to keep the desired setting.
After you have set the low-level mute you automatically exit the
third setup menu.
2. Setup menu
3. Setup menu
DEFAULT SETUP SETTINGS AT TIME OF SHIPMENT
Parameter Setting
LNB DC OFF
LEVEL dBµV
LOW LEVEL MUTE ON
MAINS AND BATTERY OPERATION
The MSK 125 can be operated on the mains or by means of its
integrated battery.
MAINS OPERATION
Remove the supplied AC power unit (100 V ... 250 V) from the
packaging and connect it to the device and mains. The integrated
lithium-ion battery and the green LED next to the button
indicate the external power supply.
For mains operation use only the supplied power unit. The
power unit is connected to the XLR power supply socket on the
left side of the device.
For longer times the devices is not used it should be connected
to the mains occasionally (trickle charge)
Note: A 12 V vehicle supply cable can be obtained through
our customer service (company ESC, address see page 67)
(order no.: 19700841BF).