Konica Minolta Network Printer - Manual (Page 76)

Weekly Timer Function (continued)
5-18 Printing Operations
Timer Interrupt (continued)
Printing Operations
1 Enter a 4-digit number Timer Interrupt password using the keypad on the control panel.
If an invalid password is entered, enter a valid 4-digit password.
2 Press the [START].
3 Enter a 1-digit hour (ex. 3 hour is 3) using the keypad on the control panel. (0 ~ 9)
4 Press [START].
5 Enter a 2-digit minutes (ex. 7 minutes is 07) using the keypad on the control panel. (05 ~
60)
6 Press [START].
Printing is available until the set time is up.
7 When timer interrupt is finished, press [POWER SAVER ON/OFF].
The Shut-Off Setting Screen will be displayed.
Timer interrupt mode
Enter password
✻✻✻✻
Input print time
0 hour(s) 05 minute(s)
Input print time is
3 hour(s) 05 minute(s)
Input print time is
3 hour(s) 07 minute(s)
HOME