Konica Minolta Network Printer - Manual (Page 120)

9-4 Key Operator Mode
Key Operator Mode
Function Menu Map
FUNCTION MENU SUB FUNCTION MENU AND SETTING OPTIONS
[1] System initial setting [1] Date&Time setting: [Present time; Setting time; Summer
time ON/OFF; Difference in time]
[2] Language select setting: [American English]
[3] IP address setting: [IP address; Subnetmask; Gateway
address; Line speed]
[4] E.C.M. Function
setting
[1] E.C.M. data edit: [Change; Add; Delete; Count reset]
[2] E.C.M. all count reset: [YES; NO]
[3] E.C.M. function setting: [ECM On; ECM Off; Immediately;
After job; Warning]
[6] Paper type / Special Size
Set
Paper type: [Blank; Normal; Thick; Recycle; Thin; Color;
User; Special; Tab paper; Fine; Seal]
Special size: [STD size; STD size (special); Non STD size;
Wide paper]
[7] Panel contrast /
Key Sound Adj.
[Panel contrast; Backlight contrast; Buzzer volume
regulation]
[8] Key operator data
setting
[Name; Key Operator Tel. No.]
[9] Weekly timer [1] Weekly timer ON/OFF setting: [On; Off]
[2] Timer setting: [ON time; OFF time]
[3] Timer action ON/OFF setting: [ON; OFF]
[4] Lunch hour off setting: [Valid; Invalid]
[5] Timer interrupt password set: [4-digit password]
[10] Control panel adjustment
[11] Tray Auto Select Setting ATS/APS switch: [ON; OFF]
Tray priority: [Tray 1, Tray 2, Tray 3, LCT, Bypass]
[12] Power save setting Auto low power: [5, 10, 15, 30, 60, 90, 120, 240 ]
Auto shut off: [---, 30, 60, 90, 120, 240]
[13] Memory switch [9] Automatic tray switching
[20] Job offset operating
[21] Continuation print
[22] Key click sound
[23] 1 SHOT indication time
[24] Power save screen
[29] Arrow key change (Image Shift)
[33] Key click sound (No paper/JAM)
[37] Trimmer (STD/Non STD size)
[39] Bookmark function
[44] Image recalled cont. (SRV)
HOME