Konica Minolta Network Printer - Manual (Page 157)

Key Operator Mode 9-41
Key Operator Mode
Finisher Adjustment [17] (continued)
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen. (See note.)
To display menus [11] to [20] of the Key Operator Mode Screen, touch the
Lower
arrow key.
2 Touch [17] Finisher adjustment to display the Finisher Adjustment Menu Screen.
3 Touch the desired menu key to display the adjustment screen for each function.
4 Make fine adjustment on the screen, then touch
RETURN to restore the Finisher
Adjustment Menu Screen.
5 Touch RETURN to restore the Key Operator Mode Screen.
6 Touch RETURN to return to the Basic Screen and perform printing operations.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
Punch Unit Vertical Position Adjustment Screen Z-Folding Position Adjustment Menu Screen
1st Folding Position Adjustment Screen 2nd Folding Position Adjustment Screen
Three-Folding Position Adjustment Screen 2 Positions Staple Pitch Adjustment Screen
HOME