Konica Minolta Network Printer - Manual (Page 25)

Safety Information 2-11
Safety Information
Finisher Capacity Requirements (continued)
CAUTION:
FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR
MACHINE DAMAGE.
❒ FINISHER PAPER CAPACITY (continued)
Booklet tray (FS-210 only)
100 sheets max. (11"x17", 8.5"x14")
75 sheets max. (8.5"x11"R, A4R)
50 sheets max. in Three-Folding mode
(The maximum number of sheets varies, depending on the number of pages in the
booklet and whether Folding or Stapling & Folding is selected. See p. 4-7.)
❒ FS-210 FINISHER BOOKLET MODE OUTLET
Inside the Booklet mode outlet is the roller drive unit. DO NOT put your hand into it when
removing the folded or stapled & folded sheet; otherwise you may be injured.
❒ FS-110/FS-210 FINISHER PAPER EXIT OUTLET
To avoid injury when stapling large size prints, DO NOT put your hand into the open Paper
exit outlet.
❒ FS-110/FS-210 FINISHER PRIMARY (MAIN) TRAY
When printed materials are removed from the primary (main) tray of FS-110/FS-210
Finisher, the tray goes up automatically. To avoid injury, DO NOT put your hand on top of
the printed sheets. Be sure to hold both sides of the printed sheets when removing them,
and DO NOT leave your hand on the printed sheets while the primary tray goes up.
HOME