KORG TRITON STUDIO V2 - Manual (Page 70)

65
Disk
Global
Sampling
Combination
Program
Other functionality
Automatically-set parameters and their values
- : Not set automatically
Values enclosed in parentheses ( ) are automatically set according to the settings you make in the dialog box.
*1 : Settings for analog, S/P DIF, and mLAN (“Input 1” and “Input 2”) are made automatically.
*2
: The input source setting (“Input 1” and “Input 2”) you specified for “Source Audio” in the dialog box will be set automati-
cally.
*3 : If “Source Audio” is Mono-1 this will be L-Mono, if Mono-2 this will be R-Mono, and if Stereo this will be Stereo.
*4
: When “Save to: RAM,” and “Convert to Program” is checked.
Parameter 1. Initialize 2. Resample Combination Play 3. REC Audio Input
Input (Input Source) (Analog, S/P DIF, mLAN) *1 (Source Audio) *2 (Source Audio) *2
Input1 Level 127 127 127
Pan L000 L000 L000
BUS Select Off Off 1/2
Send1 000 000 000
Send2 000 000 000
Input2 Level 127 127 127
Pan R127 R127 R127
BUS Select Off Off 1/2
Send1 000 000 000
Send2 000 000 000
Sampling Setup Source BUS L/R L/R Indiv.1/2
Trigger Note On Note On Sampling START SW
Metronome Precount Off - -
Save to RAM (Save to) (Save to)
Mode Stereo Stereo (Source Audio) *3
Sample Time: RAM Maximum - -
Sample Time: DISK 4min 59.999sec - -
Recording Level [dB] –12.0 –12.0 +0.0
Select Bank
(Page Menu Command) Auto +12dB On On On Off
Convert to Program Off (Convert to Program) (Convert to Program)
Program - (Program) (Program)
MS - Newly created *4 Newly created *4
Orig.Key - C2 *4 C2 *4