Konica Minolta 9 - Manual (Page 45)

2. Turn either control dial until
and the desired data area appears in
the data panel.
87 86
Recalling Data
1. Open the control panel door, then
press the data-memory button.
• and the current data memory mode appear
in the data panel.
3. Press the adjust button to view the
first data area.
• blinks in the data panel.
Continued on the following page
Overwriting
appears in the data panel before the data for
the first exposure in Area 1 is overwritten.
• disappears after the first exposure.
• Old data is erased one frame ahead of the current frame.
Area appears only when the film area changes from 7 to 1
and disappears after the data from the first exposure is
recorded.
DATA MEMORY
SPECIAL
FUNCTIONS