Konica Minolta 9 - Manual (Page 42)

OTHER — PC Terminal OTHER — Remote Release Terminal
81 80
Flash units which can not be connected to the accessory shoe can be connected to
the camera via the PC terminal.
• TTL automatic flash metering does not function when the flash is connected to the PC
terminal.
1. Set the exposure mode dial to M,
then set the shutter speed to 1/250
or slower.
Flash units with a low trigger voltage may not work on this
camera. Contact a Minolta Service Facility if your flash has a
low trigger voltage.
2. Plug the PC connector into the
camera’s PC socket.
• The flash unit may fire unexpectedly if it is on
when the sync. cord is plugged into the PC
terminal.
• The PC terminal is compatible with both center
positive (normal polarity) and center negative
(positive polarity) flash units.
1. Slide the remote-control-terminal
cover down.
Attach either the Remote Cord RC-1000S or RC-1000L (sold separately) to reduce
blur when taking long exposures.
2. Insert the plug into the terminal.
ADDITIONAL
FEA
TURES