Konica Minolta 9 User Manual
Page 44
2. Turn either control dial until
appears in the data panel.
• The film area to which the data will be stored is
displayed in the frame counter.
DATA MEMORY
85
84
Select
at step 2 to turn data-memory off.
3. Press the shutter-release button
partway down to enter the selection.
•
appears in the data panel when data-
memory is on.
Press the data-memory button to
display the current film area.
When selected, Data Memory stores the following exposure information for each
frame on up to seven 36-exposure rolls.
Data is stored in seven separate film areas. Area 1 stores the data from the first
roll, area 2 the second, etc. When all the data areas are full, new data is written to
area 1, erasing the previous data.
• Data area assignments are not user selectable.
• Only the data for the first exposure of a multiple exposure is stored.
• Data is not stored unless film is loaded.
Selecting Data Memory
1. Open the control panel door, then press
the data-memory button.
Shutter Speed
Aperture
Focal Length
Exposure Compensation Value (Bracketing Increment included)
Exposure Mode
Flash Compensation Value (Bracketing Increment included)
Metering Mode
SPECIAL
FUNCTIONS