Konica Minolta 9 User Manual

Page 48

CUSTOM FUNCTIONS

Mid Reload

Mid Reload decreases the chances of accidental double exposure when reloading a
partially exposed roll of film.

• Reloading a partially exposed roll increases the risk of film damage (scratches) caused by

dust and grit.

1. Set custom function 3 to setting 3 .

2. Load the film (p. 15).

• The film is automatically advanced to frame 1.

3. Open the control panel door, then

press and hold the adjust button
until 1 blinks in the data panel.

4. Turn either control dial until the

frame number you want to advance
the film to blinks in the data panel.

• Advance the film a minimum of two frames past

the last exposed frame.

5. Press the adjust button.

• The film is automatically advanced to the desired

frame.

Cust 1 — AF/Release priority

1 – AF priority

Shutter will not release until

appears in the viewfinder.

2 – Release Priority

Shutter releases even if the focus cannot be confirmed.
Use release priority when photographing moving
subjects.

• RP will appear in the data panel.

Cust 2 — Film Rewind Start

1 – Automatic

Film is automatically rewound at the end of the roll.

2 – Manual

User must press the manual-rewind button to initiate rewind (p. 24).

Cust 3 — Film Tip

1 – Film is completely rewound into the cartridge.

2 – Leader is left out of the cartridge after rewind.

3 – Leader left out after rewind. / Camera setup for Mid Reload.

SPECIAL

FUNCTIONS