Control switch settings, Switching each effect on/off, Using tap tempo to set a parameter – KORG Ax3000b User Manual
Page 50: Effect control, P.44 control switch set- tings), P.44 control switch settings), Ontrol, Switch, Settings, Tap tempo
44
C
ONTROL
SWITCH
SETTINGS
You can make the following control switch settings independently for each program.
Press the EXP/CTL button and use value knob 5 to select the effect you want to
control.
S
WITCHING
EACH
EFFECT
ON
/
OFF
NOTE: The CONTROL switch LEDs indicate the on/off status.
U
SING
TAP TEMPO
TO
SET
A
PARAMETER
NOTE: The CONTROL switch LED will blink at the tempo you specify.
NOTE: The maximum tap interval is 10 seconds.
E
FFECT
CONTROL
NOTE: If you haven’t selected an applicable effect, nothing will be controlled.
HINT: When you set the delay effect type to “HOLD DELAY” or “FREEZ,” the con-
trol switch will automatically be assigned to “HOLD DLY” or “FREEZ.” In this case,
the target will automatically return to its original setting if you change the delay
effect to another type without performing any other operation.
• “I/ON OFF”
External effect insertion on/off
• “P/ON OFF”
Pre-effect on/off
• “A/ON OFF”
Drive/Amp model on/off
• “M/ON OFF”
Modulation effect on/off
• “D/ON OFF”
Delay effect on/off
• “R/ON OFF”
Reverb effect on/off
• “MOD TAP”
Use TAP TEMPO to set the SPEED parameter of the
modulation effect
• “DLY TAP”
Use TAP TEMPO to set the TIME parameter of the delay
effect
• “FLN TRIG”
LFO START TRIGGER of the CLASSIC FLANGER effect
• “ROT SPD”
SPEED SW of the ROTARY effect
• “HOLD DLY”
HOLD of the HOLD DELAY effect
• “FREEZ”
ON of the FREEZ effect