KORG Ax3000b - Manual (Page 41)

DRIVE/AMP
CABINET
PRE EFFECT
MODULA
TION
DELA
Y
REVERB
Effect Type
Tuner
35
E. DELAY
EFFECTS
Here you can select one of 11 delay-type effects.
*: This indicates a parameter that you can control from the expression pedal.
1. ECHO PLUS
This models one of the most respected analogue tape echo machines ever made.
In the original, the “echo” is produced by a playback head and the exact “delay
time” is set by varying the motor speed. Many professionals prefer these “lo-fi”
units because of the warm, dark echoes they produce.
2. MULTI HEAD (MULTI HD)
This is a model of a tape echo unit boasting three playback heads. The echo from
each head (A, B, C) has its own feedback loop, letting you create warm and com-
plex “multitap” echo effects.
3. ANALOG DELAY (ANLG DL)
This models an analog delay that used a bucket-brigade device (BBD) instead of a
tape mechanism and was known for its compactness and reliability. It is character-
ized by a warmly distorted sound.
[1] “TIME” 26–2700[ms] * Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay.
[4] “LO DAMP” 0.0–10.0 * Adjusts the amount of low-frequency attenu-
ation.
[5] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay.
[1] “TIME” 1–2700[ms] Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay.
[4] “MODE” Specifies the combination of heads that will
be used.
1: Use one head (C).
2: Use two heads (A, B).
3: Use two heads (B, C).
4: Use two heads (A, C).
5: Use three heads (A, B, C).
[5] MIX 0.0–10.0 * Adjusts the mix amount of the delay.
[1] “TIME” 1–2700[ms] * Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay.
[5] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay.