KORG Ax3000b - Manual (Page 38)

32
NOTE: If P2 or P3 is selected, the speed is adjusted by the SPEED 1 (value knob 2).
5. DUO PHASE (DUO PHAS)
This is an amazing phaser that provides two six-stage phasers; PHASER 1 and
PHASER 2. They can be connected in series (to make a pseudo-twelve-stage
phaser!) or in parallel, and you can also synchronize or de-synchronize the two
LFOs.
NOTE: This will not function if MODE is set to S2, P2, or P3.
NOTE: If P2 or P3 is selected, the speed is adjusted by the SPEED 1 (value knob
2).
6. TEXTREM
This models an legendary tremolo circuit. You can adjust the SPREAD setting to
produce a panning effect that extends to left and right.
P3: CHORUS 1/2 are connected in parallel, and
their LFOs are synchronized in opposite
phase (Stereo mode).
[1] “DEPTH” 0.0–10.0 * Adjusts the modulation depth of PHASER 1/2.
[2] “SPEED 1” 0.1–10.0[Hz] * Adjusts the modulation speed of PHASER 1.
[3] “SPEED 2” 0.1–10.0[Hz] * Adjusts the modulation speed of PHASER 2.
[4] “RESO” 0.0–10.0 * Adjusts the amount of resonance for
PHASER 1/2.
[5] “MODE” Specifies the connection and LFO for
PHASER 1/2.
S1: PHASER 1/2 are connected in series.
S2: PHASER 1/2 are connected in series and
their LFOs are synchronized to create a
pseudo-twelve-stage phaser.
P1: PHASER 1/2 are connected in parallel.
P2: PHASER 1/2 are connected in parallel, and
their LFOs are synchronized (Stereo mode).
P3: PHASER 1/2 are connected in parallel, and
their LFOs are synchronized in opposite
phase (Stereo mode).
[1] “DEPTH” 0.0–10.0 * Adjusts the tremolo depth.
[2] “SPEED” 1.0–10.0[Hz] * Adjusts the tremolo speed.
[4] “SPREAD” 0.0–10.0 Adjusts the left/right spaciousness.
[5] “LEVEL” 1.0–10.0 * Compensates the output level.