Calibrating the tuner, Alibrating, Tuner – KORG Ax3000b User Manual

Page 28

3. Tune your bass while watching the tuner display or the meter in the name dis-

play.

4. When you’ve finished tuning, press the EXIT/TUNE button once again or press

any desired program select switch.

HINT: If you exit the Tuner by pressing a program select switch, this will also switch
to the program you selected.

ALIBRATING

THE

TUNER

When you switch the AX3000B on, the built-in tuner is automatically calibrated to
A=440 Hz (a.k.a. “concert pitch”). If desired, you can recalibrate the tuner in the
range of A = 438 Hz–445 Hz.

• While the tuner is active, the value display shows the frequency of the reference

pitch. You can use the

▲/▼ buttons to calibrate this in the range of 438 Hz–445 Hz.

HINT: If you’ve recalibrated the tuner, remember that the setting will be automati-
cally reset to 440 Hz the next time you turn your AX3000B on.

The pitch is flat

The pitch is correct

The pitch is sharp

Tuner display

Name display