Kenwood DNX7340BTM - Manual (Page 85)

English 85
End initial setup 3
⁄
The settings above can be changed in • Menu>
(page 58).
Initial Setup
Turns the power On 1
Set each item 2
[Language] Select the language used for the
control screen and setting items. (page 60)
[Angle] You can adjust the position of the
monitor. (page 63)
[iPod AV Interface Use] Sets the terminal
which iPod is connected. ( "iPod")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display. ( "OFF")
"ON": Switches to the rear view camera video
display when engaging the shift knob of
car to "Reverse".
"OFF": Switches to the rear view camera video
display when engaging the shift knob
of car to "Reverse" and then pressing
the [AUD] button for more than 1
second.
The function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
(page 60).
[Color] Sets the screen and button illumination
color. (page 66)
[EXT SW] Setting up power specification of
the external device for which the power is
controlled from this unit. (page 63) (DNX/
DDX7 models only)
When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is
displayed.
Initial Setup