Kenwood DNX7340BTM - Manual (Page 74)

74 DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Setup Menu
Set a delay time 3
Make fine adjustment of the delay time of the
speaker output specified at Type> to have a more suitable environment for
your vehicle.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the
ears of the person sitting in the front seat, and
set the right and left positions to the center of
the vehicle interior.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the distance difference in
accordance with the farthest speaker.
50cm
80cm
150cm
+70cm
+0cm
+100cm
DVD Setup
You can set up the DVD play.
Display the DVD Setup screen 1
Touch [ ] > [ ] > [DVD SETUP]. (page 58)
Set each item 2
[Menu Language] Selects a disc menu
language.* 1
(See , page 75)
[Subtitle Language] Selects a subtitle
language.* 1
(See , page 75)
[Audio Language] Selects an audio
language.* 1
(See , page 75)
[Dynamic Range Control] Sets the dynamic
range.* 1 ( "Dialog")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen to
the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
( "ON")