Kenwood DNX7340BTM - Manual (Page 56)

56 DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Audio Control
Space Enhancer (DNX/ DDX7 models)
You can enhance the soundscape.
Display the Space Enhancer screen 1
Touch [ ] > [ ] > [Space Enhancer]. (page
53)
Set the Space Enhancer 2
1 1 1
1 Sets the soundscape level.
⁄
You cannot set Space Enhancer in tuner source. •
Position (DNX/ DDX7 models)
You can adjust the sound effects according to
your listening position.
Display the Position screen 1
Touch [ ] > [ ] > [Position]. (page 53)
Set the Position Control 2
[P1] - [P3] Stores the present adjustment setup
in memory, or calls it from memory.
To store your adjustment in memory:
Continue to touch [P1] to [P3] more than 2
seconds.
To call your adjustment from memory:
Touch [P1] to [P3] of your adjustment you
wish to call from memory.
[2], [3] Sets a listening position.
You can select any of "Front R" (Right front),
"Front L" (Left front), "Front All" (All front), and
"All" (All) positions.
[DTA] Displays the Position DTA (Digital Time
Alignment) screen.
Exit Position Control 3
⁄
The final distance is adjusted to the total of Car Type Set •
Up value (page 73) and Position Setup (both Position and
Position DTA) value.
If you change the Car Type Set Up value
• (page 73), the
position is set to "All".
Only the adjusted distance of position setup (Position
•
and Position DTA values) is stored in memory. Therefore,
the final adjustment distance changes if you change the
Car Type Set Up value (page 73).