Kenwood DNX7340BTM - Manual (Page 54)

54 DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Audio Control
[Bass Boost] Sets the amount of bass boost.
(DNX/ DDX7 models only)
"OFF"/ "Step1"/ "Step2"
[Stream Information] Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
Equalizer Control
You can set up the equalizer.
Display the Equalizer screen 1
Touch [ ] > [ ] > [Equalizer]. (page 53)
Set each item 2
DNX/ DDX7 models
DDX6 models
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
"Natural"/ "Rock"/ "Pops"/ "Easy"/ "Top40"/
"Jazz"/ "Game"*/ "iPod"*/ "User"
⁄
* DNX/ DDX7 models only. •
"User" can be selected after graphic equalizer •
adjustment is carried out. See Setup> (page 54).
"User" can be selected after tone adjustment is
•
carried out. See (page 55).
When "iPod" is selected, the [EQ] button is
•
deactivated. "iPod" uses its equalizer function.
[SystemQ-Ex] Selects items to be adjusted for
tone curve setup. (DDX6 models only)
If turned "OFF", only Level can be setup for
tone curves.
[EQ] Displays the Graphic Equalizer setup
screen. (page 54) (DNX/ DDX7 models only)
[Tone] Displays the Tone curve setup screen.
(page 55) (DDX6 models only)
Graphic Equalizer Setup (DNX/ DDX7
models)
You can Manually set the equalizer curve.
Display the Equalizer screen 1
Touch [ ] > [ ] > [Equalizer]. (page 53)
Display the Graphic Equalizer screen 2
⁄
When "iPod" is selected in , the •
[EQ] button is deactivated. "iPod" uses its equalizer
function.
Set the Graphic Equalizer 3
1 1 1
1 Gain level can be adjusted by touching the
each frequency bar.
[2], [3] Sets a frequency.
[5], [∞] Sets a gain level.
[EQ Init] Returns to the previous level which
the gain level is adjusted.
[Flat] Tone curve becomes flat.
[Bass EXT] Bass Extend settings.
If turned "ON", it extends the 62.5 Hz to the
low register by approximately 20%.
[SW Level] Adjusts the subwoofer volume.