Kenwood DNX7340BTM - Manual (Page 31)

English 31
Radio Listening
Source Control Screen
Switches to the source control screen to use
various functions.
Display the Source 1 Control Screen
See Screen> (page 14).
Operation on the Source Control screen 2
1 1 1
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[TI] Turns the Traffic Information function On
or Off.
See , (page 34).
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
[List] Display the Tuner Preset List Screen.
(page 32).
1 Information display
Selects the Program Service Name, Title &
Artist name, Radio Text Plus, or Radio Text.
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[ ] When is appeared, the text display is
scrolled by touching it.
Various control screens appear in the Tuner Source mode.
• Set the remote controller mode switch to "AUD" mode before starting operation, see
(page 79).
Multi Function
[1/3] Switches the multi function display.
[ ] Closes the multi function bar.
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See (page 32).
[PRE] Lists and selects memorized station.
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
[PTY] FM FM Searches station by program
type. See
[MONO] FM FM Select the Monaural
reception. (Region 2/ 3 models only)
[CRSC]
FM FM Turns the CRSC function On or
Off. (Region 4/ 6 models only)
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall the stations on memory.
For memory of broadcasting stations, see
(page 32) or Memory> (page 33).
[LO.S] Turns the Local Seek function ON or Off.
(Region 2/ 3 models only)
Next page 3