Kenwood DNX7340BTM - Manual (Page 65)

English 65
Entering Background
Loads a image for background.
Connect the device which has the image 1
to load
Display the Background screen 2
Touch [ ] > [ ] > [Display] >
[Background]. (page 58)
Display the Background Memory screen 3
[Change] Selects a image for background.
[Delete] Deletes the background image.
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
Select a medium 4
Select the image to load 5
1 1 1
1 Lists the files.
[ ] When is appeared, the text display is
scrolled by touching it.
[ ROOT] Moves to the top hierarchy level.
[ UP] Moves up a hierarchy level.
Load the image 6
1 1 1
1 Rotates the image.
⁄
See • (page 8) for readable image
specifications.
The [Memory] button on the “Background” screen
•
becomes active only in STANDBY source mode.
Pressing the [Memory] button on the “Background”
•
screen switches the AV OUT source to OFF.
For resetting the AV OUT source, refer to Setup> section.
While loading the Background image, any other
•
operation is prohibited.
Background Change
Selects a image for background.
Select Background Change screen 1
Select a image for background 2
1 1 1
1 Returns to the initial background.
Set the image as the background 3