Kenwood HM-DV7 - Manual (Page 57)

57
Timer operation
Application section
Listening to an AUX input source
Connect the related equipment under reference to "Connection of external source component" !
1
Press the AUX key.
2
Play the connected equipment.
3
Adjust the volume.
AUX
VOLUME/
MULTI CONTROL
Each press switch the modes as follows.
1 "CD-R" (Analog)
2 "AUX" (Analog)
1
Press the AUX key. (Select the "CD-R" or
"AUX" input)
2
Press the MODE key.
3
Turn the VOLUME/MULTI CONTROL knob
to select "INPUT LEVEL", then press the
SET/ DEMO key.
4
Adjust the input level.
5
Set it.
P U T N I L E V E L
D R C I N P U T + 1
Each press switch the modes as follows.
1 "CD-R" (Analog)
2 "AUX" (Analog)
Input level
This adjusts the input level for the external equipment (video deck etc.) connected to the AUDIO CD-R
IN(AUDIO AUX IN) terminal. Adjust so that the volume of the AUX input source sounds at an equivalent
level to the CD. (Main unit operation only)
Adjusting the AUX Input Level
AUX
MODE
VOLUME/
MULTI CONTROL
SET/DEMO
\
VOLUME/
MULTI CONTROL
The level
increases The level
decreases
SET/DEMO
÷ Adjustment is possible over the range from - 4 to + 3.