Kenwood HM-DV7 - Manual (Page 52)

52
Various playback features
Application section
STOP AUTO/MONO
7
1 2 3
4 5 6
7 8 9
+ 100 0 + 10
PGM/PTY
D C P 0 1 T - -
PGM
1 2
HIGH
OM
F
D C P 0 1 T 0 9
DVD/CD
6
SET
Check that the unit is in the stop mode.
Enter track Nos. in the order you want to play them.
Start playback.
Select the "DVD/CD" input. ¢
÷ Up to 32 tracks can be programmed. When "PGM FULL"
is displayed, no more tracks can be programmed.
÷ If you do not press the SET key before the track num-
ber display stops blinking, the track number entry is
canceled.
1
Select a track number using numeric keys.
2
Press the SET key.
3
Repeat steps
1 and 2.
Blinks
Selection of
tracks
Press the numeric keys as shown below....
To enter track No. 12 ... +10, 2
To enter track No. 20 ... +10, +10, 0
Listening to the desired sequence
(program playback)
VCD CD
Desired tracks in a disc can be programmed in the desired order and played back.
(Program playback is not available with DVD VIDEO.)
1
3
4
Program position of the track
to be selected next.
If is in play mode
Press the STOP
7/AUTO/MONO key.
Light the "PGM" indicator.
2
÷ Tracks will be played in the order they were pro-
grammed (following the program numbers).
÷ When the 4/ ¢ key is pressed during play, the pro-
gram will jump to the preceding or the following track
respectively.
÷ When the 4 key is pressed once during playback, the
play position returns to the beginning of the current
track being played.
Blinks
Various playback features
÷ If P.B.C. is On, be sure to set it to Off. fi