Kenwood HM-DV7 - Manual (Page 10)

10
System connection
Preparation section
Connection of Other Accessories
(Commercially Available Parts)
When connections are to be made, make sure that the power plug is not plugged into a wall AC outlet.
Connect the equipment as shown in the figures.
To Connect a TV
Monitor TV
S-VIDEO VIDEO
VIDEO OUT
Video cord (accessories)
S-Video cord (Commercially available)
S-Video input
Video input
Set initial setup "TV Aspect" according to the aspect ratio (4:3 or 16:9) of your TV. °
If the TV has an S Video input connector, connect the VIDEO OUT S-VIDEO connector of the player to it using
the provided S Video cord.
The video output from the player should be connected directly to the TV. If the video output is
connected through a VCR, the picture displayed on the TV may be disturbed due to the copy pro-
tect function.
Select the video connection method according to the TV in use. (When S-Video
cable is connected, the ordinary video connection is not necessary.)
Using Headphones
1
Insert the headphone plug into the PHONES
jack.
2
Adjust the volume with the VOLUME/
MULTI CONTROL knob.
PHONES
÷ Headphones with a stereo mini plug can be con-
nected.
÷ The sounds from all speakers are cut off.
When a DTS-encoded disc (CDs, LDs, DVDs) is
played, noise may interfere with the headphone
output. To enjoy DTS digital surround playback
through headphones, connect an external 5.1-
channel DTS digital surround decoder system to
the digital output of the DVD player and use the
headphones jack of your amplifier or receiver.